Product ID:8XX INDUSTRIAL HIGH GLOSS ENAMEL, 820
MSDS Date:07/01/1993
FSC:8010
NIIN:00N048784
MSDS Number: BXWXS

AMERITONE PAINT CORP

LONG BEACH, CA 90801
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 310-639-6791

Cage: FO133

AMERITONE PAINT CORP/COMPTON, CA 90221

190 LONG BEACH, CA 90801 US

Telephone: 310-639-6791

Cage: FO133

SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MINERAL

CAS: 64742-88-7

Fraction By Weight: 35%

OSHA PEL N/K

ACGIH TLV: N/K

SILICA, CRYSTALLINE - QUARTZ; (CRYSTALLINE SILICA)

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 5%

OSHA PEL N/K

ACGIH TLV: 0.1 MG/M3 RDUST

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

419.9 LBS/GAL

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

INTENTIONAL INHAL

RTECS: 9999999ZZ

CLOSED CONTAINER UNTIL PROPERLY DISPOSED OF.

RTECS: 9999999ZZ

OVERSPRAY & SANDING DUST. WHEN USED IN

RTECS: 9999999ZZ

DESIGNED TO REMOVE COMBINATION OF PARTICULATES & VAP.

RTECS: 9999999ZZ

AIR SUPPLY RESP OR HOODS. USE NIOSH/MSHA APPRVD

RTECS: 9999999ZZ

MATL COATED W/THIS PRODUCT. FOLLOW RESP MFR'S

RTECS: 9999999ZZ

BELOW CURRENT APPLIC SFTY & HLTH STDS IN MIXING,

RTECS: 9999999ZZ

DRIED COATING & DECOMP PRODUCT DURING WELDING &

RTECS: 9999999ZZ

ALKYD RESIN

Fraction By Weight: 45%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: IRRIT OF RESP TRACT; MAY
AFFECT BRAIN/NERVOUS SYS CAUSING HDCH, NAUS, DIZZ, WEAK & FATG.
EXTREME EXPOS CAN RSLT IN UNCON & EVEN RESP ARREST. EYES/SKIN: MAY
CAUSE IRRIT. INGEST: CAN CAUSE STOMACH &/OR INTESTINAL IRRIT,
NAUS, VOMIT & DIARR. ASPIR OF VOMITUS CAN CAUSE CHEM PNEUM WHICH
CAN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ:IARC MONO,
SUPP, V 7, PG 341, 1987:GRP 2A. NTP 7TH ANNUAL RPT ON CARCINS,
1994: ANTIC CARCIN.
Effects of Overexposure:HLTH HAZ: BE FATAL. CHRONIC: REPORTS HAVE ASSOC
RPTD & PRLNG OCCUP OVEREXP TO SOLVS W/PERM BRAIN & NERVOUS SYS DMG.
PRLNG & PRTD BRTHG OF SPRAY MIST &/OR SANDING DUST OVER PERIOD OF
YRS MAY CAUSE DUST DISEASE OF LUNGS. EXCESS INHAL OF CRYSTALLINE
SILICA IS KNOWN CAUSE OF SILICOSIS. (RISK DEPENDS ON DURATION &
(ING 6)
Medical Cond Aggravated by Exposure:NONE WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION.

First Aid:INHAL: LEAVE AREA TO OBTAIN FRESH AIR. IF DFCLTY CONTINUES,
SUMMON MED ASSISTANCE IMMED. IF BRTHG CEASES, RESTORE USING APPRVD
CPR TECHNIQUES & SUMMON MED ASSISTANCE IMMED. EYES: FLUSH W/LG AMTS
OF WA TER FOR AT LEAST 15 MIN. GET MED ASSISTANCE. SKIN: REMOVE
W/SOAP & WATER. REMOVE SOILED CLTHG. INGEST: DO NOT INDUCE VOMIT.
CONSULT MD IMMED. ASPIR OF VOMITUS CAN CAUSE CHEM PNEUM WHICH CAN
BE FATAL.

Flash Point Method:SCC
Flash Point:102F,39C
Lower Limits:SEE ING 2
Extinguishing Media:IN CASE OF FIRE, USE CARBON DIOXIDE, DRY CHEMICAL,
FOAM OR OTHER NFPA APPROVED METHOD FOR TREATING CLASS B FIRE.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
SUMMON PROFESSIONAL FIREFIGHTERS. WATER SPRAY MAY BE INEFTIVE. IF
WATER IS USED, FOG NOZZS ARE PREF. (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT & FLAME. DUE TO PRESS BUILDUP, CLSD CNTNRS EXPOS TO EXTREME
HEAT MAY EXPLODE. NEVER USE WELDING OR CUTTING (SUPDAT)

Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT (HEAT, FLAME). DO
NOT SMOKE. AVOID BRTHG VAPS. BEFORE ATTEMPTING CLEANUP REFER TO HAZ
CAUTION INFO IN OTHER SECTIONS OF MSDS. VENT AREA. CNTN SPILLED
MATL & REMOVE W/INERT ABSORB & NON-SPARKING TOOLS. STORE IN (ING
7)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FROM HEAT & FLAME. DO NOT
SMOKE. DO NOT STORE >120F OR NEAR FIRE/OPEN FLAME. KEEP CNTNR CLSD
WHEN NOT IN USE. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:PREVENT BUILDUP OF VAPORS BY MAINTAINING CONTINUOUS
FLOW OF FRESH AIR. STORE LARGE QUANTITIES IN BUILDINGS DESIGNED TO
COMPLY W/OSHA 1910.106. DO NOT TRANSFER CONTENTS TO BOTTLES/OTHER
UNLABELLED CONT AINERS. DO NOT REUSE EMPTY CONTAINERS.

Respiratory Protection:DO NOT BREATHE VAPS, SPRAY MIST OR SANDING DUST.
WHEN SPRAY APPLIED IN OUTDOOR OR OPEN AREAS W/UNRESTRICTED VENT &
DURING SANDING/GRINDING OPERATIONS, USE NIOSH/MSHA APPRVD MECH
FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF (ING 8)
Ventilation:USE ONLY W/ADEQ VENT. PROVIDE GEN DILUTION OR LOC EXHST
VENT IN VOL & PATTERN TO KEEP AIR CONTAMINANT CONC (ING 12)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:SO NOT GET ON SKIN. SOLVENT IMPERMEABLE
CLOTHING & BOOTS TO PREVENT CONTACT ARE RECOMMENDED.
Work Hygienic Practices:REMOVE & WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health
FIRE FIGHT PROC: IF EXPOS TO FIRE/EXTREME HEAT, WATER SHOULD BE USED TO
COOL CLSD CNTNRS & PVNT PRESS BUILDUP/POSS AUTOIGNIT. EXPLO HAZ:
TORCH ON/NEAR CNTNRS (EVEN IF EMPTY) AS PROD/ITS RESIDUE MAY IG
NITE. DURING EMER CNDTNS, OVEREXP TO DECOMP PRODS MAY CAUSE HLTH
HAZ. SYMPS MAY NOT BE IMMED APPARENT. OBTAIN MED ATTN.

Boiling Pt:B.P. Text:600F,316C
Vapor Pres:SEE ING 2
Vapor Density:HVR/AIR
Spec Gravity:1.004
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:50.5

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE HAZ FUMES WHEN HEATED TO
DECOMP. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON DIOXIDE & OXIDES
OF LISTED METALS.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.